ABQ Balloon Fiesta Logging
Two test flights logged with Autonomous Innovations logging devices on the Friday before the 2007 Albuquerque Balloon Fiesta (10/05/2007).
The 'Just in Case' has data indicating when the burners were fired, which is visible on top of the 3D track as little white lines.

Legend - speed

Just in Case
Click for graphs. This is the track for the "Just in Case". Many many thanks to pilot Mike Braddock!

Pictures

Take off!
From the 'Just in Case' shortly after takeoff.

Logging Device
Here's a shot of the logging device attached to the basket. The GPS used with this board has an external antenna, which can be seen resting on the padded edge.

Happy First-Time Balloonist
Our pilot had to deal with three first-timers on this flight. Also notice the Aerotonda Balloon in the background.

Shadow through Power Lines
Floating safely above the power lines, with many other balloons visible in the background near Balloon Fiesta Park.

Landing in the Cul-de-Sac
Starting to pack up the balloon after our super-soft landing on the street.

Melted Remote Sensor
This is one of the slightly melted sensors that was attached inside the top of the balloon. The sensor was measuring g-forces, temperature, and rotation, and continued to run the whole time despite registering temperatures of 250 degrees Fahrenheit! We're now looking for new cases that can withstand the heat better.

Track

Burn Track

Time Markers

Start

Aerotonda
Click for graphs. This is the track for the "Aerotonda". Many many thanks to David (Pilot) and Carol LaRotonda!

AI Logo